Functions of the AOP30
Figure 8-1 AOP30 operator panel
The AOP30 has the following features and functions:
● Graphics-capable LCD with the following features
– Green backlighting for plain-text display
– Resolution of 240 x 64 pixels
– Quasi-analog bar-type display for process variables
● Keypad for operational control of a drive
● Numeric keypad for the numeric input of parameter values
● 4 LEDs for indicating the operating state of the drive unit:
– RUN: green
– ALARM: yellow
– FAULT: red
– LOCAL/REMOTE: green
● Help function describing causes of and remedies for faults and alarms
● Function keys for prompted navigation through the menus
● Realtime clock for the time stamping of faults and for setting up simple time controls
● LOCAL/REMOTE switchover for selecting the operating location
● Two-stage security concept to protect against unintentional or unauthorized changes to
settings.
● Time and date memory powered by internal battery backup
Operation
8.2 Operation via the AOP30 operator panel
SINAMICS GM150 6SL3815-2LN41-4AA2
Operating Instructions 04/2017 127
To Next Page
Loading...
