Siemens SINAMICS GM150 - Page 139

The menu structure of the inhibit functions
6DIHW\ORFNV
2SHUDWH/RFN
3DUDPORFN
$FFHVVOHYHO
Calling up the inhibit function menu
1. Press the key with the key symbol.
Ⴍ
6DIHW\ORFNV
3DUDPORFN
$FFHVVOHYHO
2SHUDWHORFN
%DFN
ႱႧ&KDQJH
QRWBDFWLYH

ႱႧ
QRWBDFWLYH
6WDQGDUG
+HOS
&KDQJH
&KDQJH
The various inhibit functions are described in the following.
Operator input inhibit
Parameters can only be changed by entering a password.
1. Press the <▲> or <▼> function key to select the "Operator input inhibit" function.
2. Press the <Change> function key to select the "active" or "inactive" setting.
– "active"
The contents of parameters can be viewed, but not saved. If you want to save a
parameter, this message appears: "Note: Inhibit function active".
The <OFF> key acts. The <LOCAL/REMOTE>, <LEFT>, <RIGHT>, <UP> and
<DOWN> keys are inhibited.
The key symbol indicates the inhibit.
– "inactive"
No operator input restrictions.
3. Press the <Back> function key to save the setting.
Parameterization inhibit
Prevent unauthorized parameterization. This function is protected with a password.
Operation
8.2 Operation via the AOP30 operator panel
SINAMICS GM150 6SL3815-2LN41-4AA2
Operating Instructions 04/2017 139