Siemens SINUMERIK 808D User Manual

Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA6, 09/2017
241
31.
Confirm your input and open the cycle programming window.
32.
Open the window for HOLES2 through the following softkey operations:
→
Enter the desired parameters as follows:
33.
Press this softkey to confirm your input and open the cycle programming window.
Enter the following blocks:
MCALL
G0 Z100 M9
M05
M30
Then you can proceed with the operations for "
program simulation and execution
(Page
278)".
Screenshots of the complete program
Screen 1:
Screen 2:

Siemens SINUMERIK 808D Specifications

General

Brand	Siemens
Model	SINUMERIK 808D
Category	Control Unit
Language	English