Siemens SINUMERIK 810D

Expanding the Operator Interface (BE1) 08/2005
8 Terms, Tables, Lists, Examples
© Siemens AG, 2005. All rights reserved
BE1/8-200 SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
8.6 Examples
//S(Start)
HS7=("Example", se1, ac7)
PRESS(HS7)
LM("Form4")
END_PRESS
//END
//M(Form4/"Example 4: Machine control panel"/"MST.BMP")
DEF byte=(I/0/0/"Input byte, Standard=0","Byte
No.:",""/wr1,li1///380,40,100/480,40,50)
DEF Feed=(IBB//0/"","Feed
Ovrd.",""/wr1//"EB3"/20,180,100/130,180,100),
Axistop=(B//0/"","Feed
stop",""/wr1//"E2.2"/280,180,100/380,180,50/0,11)
DEF Spin=(IBB//0/"","Spindle
Override",""/wr1//"EB0"/20,210,100/130,210,100),
spinstop=(B//0/"","Spindle
stop",""/wr1//"E2.4"/280,210,100/380,210,50/0,11)
DEF custom1=(IBB//0/"","Customer keys
1",""/wr1//"EB6"/20,240,100/130,240,100)
DEF custom2=(IBB//0/"","Customer keys
2",""/wr1//"EB7"/20,270,100/130,270,100)
DEF By1
DEF By2
DEF By3
DEF By6
DEF By7
HS1=("Input byte", SE1, AC4)
HS2=("")
HS3=("")
HS4=("")
HS5=("")
HS6=("")
HS7=("")
HS8=("")
VS1=("")
VS2=("")
VS3=("")
VS4=("")
VS5=("")
VS6=("")
VS7=("")
VS8=("OK", SE1, AC7)