Commissioning HMI Advanced (IM4) 08/2005
2 Functions/Parameterization
© Siemens AG, 2005. All rights reserved
IM4/2-84 SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
FILE=7 ; File functions
RUN-LOG=7 ; Softkey action log, locked by user
2.5.5 DGOVW.INI
This file is used for configuring additional user-specific signals in Diagnostics →
Service Displays, “Service Overview” screen. Configured signals are added below
the standard signals in this screen and can be viewed there (scrolling may be
required). The file must be created explicitly in the directory mmc2 or addon, oem,
user.
[GLOBAL]
; Number of additional signals
NrOfSignals=
; Bitmaps with customized icons to be displayed
[BMP]
100="<Bitmapname>"
101="..."
.
.
; One section per signal
[SIG1]
text=
Item=
expr=
.
.
[SIG2].
.
.
[SIG<n>]
.
.
For details on configuration and an example, refer to “Adding User-Specific
Elements to Service Overview.”
DGOVWTXT_xx.INI
The value “xx” in the file name contains the language abbreviation. The file
contains the language-specific texts for user-specific signals in the service
overview. The file must be created explicitly in the mmc2 or user, addon, oem
…\language directory.
[TEXT]
; $T<Nr> = "Language-specific text"
; <Nr> stands for values from 1000 to 32767, values below 1000 are reserved.
; Example:
$T1001="Signal s"
To Next Page
Loading...
Need help?
General
