Siemens SINUMERIK 810D

08/2005 Starting Up HMI Embedded (IM2)
9 Configure Windows in the NC Program
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
IM2/9-123
9 Configure Windows in the NC Program
9.1 Structure of instructions.......................................................... IM2/9-124
9.2 Instruction examples............................................................... IM2/9-125
9.3 Example program 1: MMC command without
acknowledgment .................................................................... IM2/9-127
9.4 Example program 2: Hold time and optional text variables.... IM2/9-128
9.5 Example program 3: MMC command with synchronous
acknowledgment mode.......................................................... IM2/9-129
9.6 Example program 4: Positioning the input and output field.... IM2/9-130
9.7 Example program 5: Inserting pictures................................... IM2/9-132
9.8 Example program 8: Asynchronous acknowledgment mode
with softkeys........................................................................... IM2/9-133
9.9 List of files for the Files dialog ................................................ IM2/9-135
9