Siemens SINUMERIK 810D Commissioning Manual

08/2005 Commissioning HMI Advanced (IM4)
2 Functions/Parameterization
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
IM4/2-103
;0=create a workpiece (optional by template) without opening by editor
;1=open part program, job list or DAT-file after creating
; new workpiece (default)
OpenFileAfterNewWPD=1
The following is applicable to the multichannel sequence editor option in the USER
directory:
[PROGRAM]
IgnoreMissingProgramAndChan=1
OpenFileAfterNewWPD=0
The “Channel assignment missing” message does not appear when workpieces
are newly created using only a job list without MPF.
2.5.17 NETNAMES.INI
M:N assignments (SINUMERIK powerline only)
In the NETNAMES.INI file, you can determine which operating components can
operate which NCUs. The following details are specified:
• Names of the operating components
• Names of the NCUs
• Communication connections between the NCUs
• Clear assignments for startup
Details can be found in
References: /FB/, B3 Multiple Operator Panel Fronts and NCUs
Procedure
The following sequence is useful when configuring the NETNAMES.INI file for M:N
communication:
1. Copy the existing NETNAMES.BSP file created during installation, and modify
it for the application.
2. Rename the existing NETNAMES.INI file.
3. Rename the modified NETNAMES.BSP file to NETNAMES.INI.
4. Save in C:\USER\NETNAMES.INI.
5. Define groups (maximum of 24) in "logChanSetList"
6. Define NCs and channels with unique names for the groups in "logChanList".
7. For the channels, specify the NC name in "logNCName"
- Specify the channel number on the NC in "ChanNum"
- Specify Reserve softkey yes/no (via the command IsAGap" = True/False)
8. For the HMI, specify the default machine "DEFAULT_logChanGrp" and the
default channel in "DEFAULT_logChan" for startup.

Siemens SINUMERIK 810D Specifications

General

Brand	Siemens
Model	SINUMERIK 810D
Category	Control Unit
Language	English