Siemens SINUMERIK 810D

08/2005 Expanding the Operator Interface (BE1)
3 Syntax
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
BE1/3-21
3.1 Structure of a configuration file
A configuration file consists of the following elements:
• Description of the start softkeys
• Definition of the screen form
• Description of the blocks
• Definition of the softkey menu(s)
Below is a simplified example of this structure:
; Definition of the start softkey (optional)
//S (START)
....
//END
; Definition of the screen form
//M (.....)
Definition of the variable
DEF .....
; Description of the blocks:
LOAD
...
END_LOAD
UNLOAD
...
END_UNLOAD
ACTIVATE
...
END_ACTIVATE
...
//END
; Definition of a softkey menu
//S (...)
//END