Siemens SINUMERIK 810D

Online Help (HE1) 08/2005
1 Programming Help
© Siemens AG, 2005. All rights reserved
HE1/1-12 SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
File IF.INI
[TECHNOLOGY]
"m" = milling
"t" = turning
"g" = grinding
"s" = nibbling
"p" = punching
"a" = display all technologies
[TEXTFILES]
Siemens = DH\CST.DIR\IFS_GR.COM
Machine manufacturer = DH\CMA.DIR\IFM_GR.COM
Machine manufacturer = DH\CMA.DIR\IFI_GR.COM
End user = DH\CUS.DIR\USER_GR.COM
[CONTEXT]
= 0 Context sensitivity not active
= 1 Context sensitivity active
[TEXTSEARCH]
= 1 Text search only according in instruction texts
= 2 Text search only according in description texts
= 3 Text search in instruction and description texts
1.2.3 Expanding the text files
The text files have the following two categories:
1. Topic definition
2. Instruction definition
The following functions can be added to the text files (*.com) of the Help according
to the following pattern:
• General categories, i.e. "groups" of instructions
• Instructions with descriptive texts
• Instructions with Extended Help call
• Editor Help "pdf" or
• Cycle Help for input fields in the cycle screens in which the instruction
parameters are entered
• Instructions with alarm text variables as descriptive texts.
The corresponding text file provides one line each.