Siemens SINUMERIK 810D - Page 332

Starting Up HMI Embedded (IM2) 08/2005
4 Functions/Parameterization
© Siemens AG, 2005. All rights reserved
IM2/4-82 SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
9258 USER_CLASS_TM_SKNCNEWTOOLE
H04, H05
CR: FBW
- Protection level for creating new tool edges BYTE 3/4
Emb Emb: 7
0 7
Power On SW4.1
9259 USER_CLASS_TM_SKNCDELTOOL
H04, H05
CR: FBW
- Protection level for deleting tools BYTE 3/4
Emb Emb: 7
0 7
Power On SW4.1
9260 USER_CLASS_TM_SKMGBUFFER
H04, H05
CR: FBW
- Protection level for buffer ON/OFF BYTE 3/4
Emb Emb: 7
0 7
Power On SW4.1
9261 USER_CLASS_TM_SKMGFIND
H04, H05
CR: FBW
- Protection level for search BYTE 3/4
Emb Emb: 7
0 7
Power On SW4.1
9262 USER_CLASS_TM_SKMGLISTPOS
H04, H05
CR: FBW
- Protection level for positioning BYTE 3/4
Emb Emb: 7
0 7
Power On SW4.1
9263 USER_CLASS_TM_SKMGNEXT
H04, H05
CR: FBW
- Protection level for paging to next magazine BYTE 3/4
Emb Emb: 7
0 7
Power On SW4.1
9264 USER_CLASS_TM_SKTLNEWTOOL
H04, H05
CR: FBW
- Protection level for creating tools BYTE 3/4
Emb Emb: 7
0 7
Power On SW4.1
9265 USER_CLASS_TM_SKTLLREPR1
H04, H05
CR: FBW
- Protection level for displaying 1st tool list BYTE 3/4
Emb Emb: 7
0 7
Power On SW4.1
9266 USER_CLASS_TM_SKTLLREPR2
H04, H05
CR: FBW
- Protection level for displaying 2nd tool list BYTE 3/4
Emb Emb: 7
0 7
Power On SW4.1
9267 USER_CLASS_TM_SKTLLREPR3
H04, H05
CR: FBW
- Protection level for displaying 3rd tool list BYTE 3/4
Emb Emb: 7
0 7
Power On SW4.1
9269 USER_CLASS_TM_SKFINDPLACE
H04, H05
CR: FBW
- Softkey empty location, displ. Tool list BYTE 3/4
Emb Emb: 7
0 7
Power On SW4.1
9270 USER_CLASS_TM_SKACTPLACE
H04, H05
CR: FBW
- Protection level for loading to curr. location BYTE 3/4
Emb Emb: 7
0 7
Power On SW4.1