Siemens SINUMERIK 810D

Starting Up HMI Embedded (IM2) 08/2005
9 Configure Windows in the NC Program
© Siemens AG, 2005. All rights reserved
IM2/9-136 SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
%_N_MMC_EXAMPLE8_MPF
N10 QUIT_1 = "START"
N20 MMC("CYCLES, PICTURE_ON,T_SK.COM,SCREEN3,GUD4.DEF,,
QUIT_1,K1","A")
N30 LABEL0:
N40 STOPRE
N50 IF MATCH (QUIT_1,"SK1") >= 0 GOTOF LABEL1
N60 IF MATCH (QUIT_1,"SK2") >= 0 GOTOF LABEL2
N70 GOTOB LABEL0
N80 LABEL2:
N90 MMC("CYCLES, PICTURE_ON,T_SK.COM,SCREEN1,GUD4.DEF,,,
N1","N")
N100 G4 F10
N110 LABEL1:
N120 MMC("CYCLES, PICTURE_OFF","N")
N130 M30
Dialog screen files (*.COM)
%_N_T_SK_GR.COM
;$PATH=/_N_CST.DIR
//C1(SCREEN1)
(R///USER VAR TEST_1/W/TEST_1///)
//C2(SCREEN2)
(R///USER VAR TEST_2/W/TEST_2/6000,2800,8000/200,3000,7500)
//C3(SCREEN3)
(S///USER VAR QUIT_1/W/QUIT_1///)
//C4(SCREEN4)
(R///USER VAR TEST_1/W/TEST_1/4000,250,2000/6000,250,1500/)
(R///USER VAR TEST_2/W/TEST_2/4000,1000,2000/6000,1000,1500/)
(R///USER VAR SINUM_1/W/SINUM_1/0,250,2500/1900,250,2000/)
(R///USER VAR SINUM_3/W/SINUM_3/0,1000,2500/1900,1000,2000/)
//C5(SCREEN5)
(R///USER VAR TEST_2/r,rj/TEST_2///)
//C6(SCREEN6)
(R///USER VAR TEST_1,%1/W/TEST_1///)
//C7(SCREEN7)
(R///USER VAR TEST_1/W,RJ/TEST_1///)
(I///)
(R///Actual value from axis1/R/$actual value)
(R//1/R parameter12/W/$R[12])
//C8(SCREEN8)
(I///Insert picture no.///4000,3000,7500)
(I///Created with Paintbrush///4000,3250,7500)