Siemens SINUMERIK 810D

08/2005 Expanding the Operator Interface (BE1)
3 Syntax
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
BE1/3-35
Examples
Example 1:
Assign properties Variable Type, Texts, Help, Colors:
DEF Var1 = (R///,"Actual value",,"mm"//"Var1.bmp"////8,2)
Variable Type: Real
Limit values or toggle field entries: None
Default: None
Texts:
Long text: None
Short text: Actual point
Graphics text: None
Unit text: mm
Attributes: None
Help display: Var1.bmp
System or user variable: None
Position of short text: No data, i.e., default position
Position I/O field: No data, i.e., default position
Colors:
Foreground color: 8
Background color: 2
Help: none
Example 2:
Assign properties Variable Type, Limit Values, Attributes, Short Text Position:
DEF Var2 = (I/0,10///wr1,al1///,,300)
Variable Type: Integer
Limit values: MIN: 0; MAX: 10
Default: None
Texts: None
Attributes:
Input mode: Read-only
Alignment of short text: Right-justified
Help display: None
System or user variable: None
Position of short text:
Distance from left: None
Distance from the top: None, i.e., default distance
from the top left
Width: 300
Position I/O field: No data, i.e., default position
Colors: No data, i.e., default setting
Help: none
Example 3:
Assign properties Variable Type, Default, System or User Variable, I/O Field
Position:
DEF Var3 =(R//10////"$R[1]"//300,10,200//
"Help.pdf",1,"Help1")
Variable Type: String
Limit values or toggle field entries: None
Default: 10
Texts: None