Siemens SINUMERIK 810D Commissioning Manual

Commissioning HMI Advanced (IM4) 08/2005
2 Functions/Parameterization
© Siemens AG, 2005. All rights reserved
IM4/2-118 SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
[APPLICATION]
; HSK1.. - HSK8.. (horizontal softkeys)
; HSK9.. - HSK16.. (ETC softkeys)
; VSK1.. - VSK8.. (vertical softkeys)
; background picture (default : none)
; 1 : machine configuration
; <filename> : load bitmap from OEM directory
Picture=
; index [1,.. initial application (default : none)
StartIndex=
; 0 : permanent task (default)
; <> 0 : terminate task at recall
TerminateTask=
;=================================================;
; for each softkey (HSK1 - HSK16 / VSK1 - VSK8) ;
;=================================================;
; taskid (see regie.ini) or logical task name (program/<root> or ExitButton)
; !!! ExitButton, display button for shutdown of HMI-Adv !!!
HSK1Task=
; 0 : recall to calling process (default)
; <> 0 : terminate application at recall (appends ;TerminateTask to
HSK1Command)
; must be supported by application !
HSK1TerminateTask=
; 0 : SwitchToChild (default)
; 1 : SwitchToTask -> switch only to task
; 2 : SwitchToTask2 -> switch to child of specified task (if it exists)
HSK1IsTask=
; command string evaluated by application (default : empty)
HSK1Command=
; accesslevel for softkey (0 - 7, default : 7)
HSK1AccessLevel=
; 0 : no link to NCK
; <> 0 : link softkey to NCK (lock softkey while no connection to NCK)
HSK1NckLink=
; default softkey text, ignored for logical task name
HSK1SkText=
; language depending softkey text, ignored for logical task name
HSK1SkText_GR=
HSK1SkText_UK=

Siemens SINUMERIK 810D Specifications

General

Brand	Siemens
Model	SINUMERIK 810D
Category	Control Unit
Language	English