Siemens SINUMERIK 810D Commissioning Manual

Expanding the Operator Interface (BE1) 08/2005
3 Syntax
© Siemens AG, 2005. All rights reserved
BE1/3-58 SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
VS2=("")
VS3=("")
VS4=("")
VS5=("")
VS6=("")
VS7=("EXIT",ac7,se1)
VS8=("")
Load
reg[0] = rnp ("$R[0]")
if (reg[0] == 0)
LG ("grid1", "var1")
else
LG ("grid2", "var1")
endif
End_Load
PRESS(VS7)
EXIT
END_PRESS
//END
//G(grid1/0/5/1,1); (name/type/lines...)
(R///"longtext1","R1 to R4"/wr2//"$R[1]"/80/1) ; 1
st
column, header "R1 to R3",
; from R1 with offset1
(R///"long text2","R5 to R8"/wr2//"$R[5]"/80/1) ; 2
nd
column, from R5
(R///"long text3","R9 to R15"/wr2//"$R[9]"/80/2) ; 3
rd
column, from R9 with offset2,
; R9 11 13 15
//end
//G(grid2/0/5/1,1); (name/type/lines...)
(R///"longtext1","R1 to R4"/wr2//"$R[1]"/60/1) ; 1
st
column, header "R1 to R3",
; from R1 with offset1
(R///"long text2","R5 to R8"/wr2//"$R[5]"/60/1) ; 2
nd
column, from R5
(R///"long text3","R9 to R15"/wr2//"$R[9]"/60/2) ; 3
rd
column, from R9 with offset2,
; R9 11 13 15
(R///"long text 4","R9 to R15"/wr2//"$R[9]"/60/2) ; 3
rd
column, from R9 with offset2,
; R9 11 13 15
//end
//G(dummygrid/0/5/1,1); (name/type/lines...)
(R///"longtext1","R1 to R4"/wr2//"$R[1]"/80/1) ; 1
st
column, header "R1 to R3",
; from R1 with offset1
(R///"long text2","R5 to R8"/wr2//"$R[5]"/80/1) ; 2
nd
column, from R5
//end

Siemens SINUMERIK 810D Specifications

General

Brand	Siemens
Model	SINUMERIK 810D
Category	Control Unit
Language	English