Siemens SITOP UPS1100 - Page 126

Engineering and remote access
3.6 Cyclic and acyclic data
SITOP UPS1600 / BAT1600 / UPS1100
126 Equipment Manual, 07.2021, A5E37775406-11-76
0x0044: NTP client status parameters (reading)
Data
Description
Data type
Last synchronization time
Time that the last synchronization took place
VisibleString(20)
from V2.2
Next synchronization time
Time of the next planned synchronization
VisibleString(20)
from V2.2
0x0045: PROFINETSecurity (reading/writing)
Data
Description
Data type
DCPReadonlyIfConnected
Setting for DCP write protection
Unsigned8 from
V2.2
Fill byte(s)
-
Unsigned8 from
V2.2