Siemens SITOP UPS1100 - Usermanagement; Web Server

Engineering and remote access
3.10 OPC UA server
SITOP UPS1600 / BAT1600 / UPS1100
178 Equipment Manual, 07.2021, A5E37775406-11-76
Display name
Data type
Definition
Description
StopBufferingVoltage
Setpoint
Float
AnalogItemType
Discharge threshold at which level buffering is stopped.
TemperatureCoeffi-
cient
Setpoint
UInt16
PropertyType
Temperature coefficient of the charging current for battery
charging.
3.10.6.24 UserManagement
Display name
Data type
Definition
Description
AddUser
Method
Method
Adds a user.
ChangeUserPassword
Method
Method
Changes the password for the user.
DeleteUser
Method
Method
Deletes the user.
UsermanagementUser
1 … 16
SitopUserType
SitopUserType
AccessLevel1Setpoint (read operating data)
AccessLevel2Setpoint (read configuration from device)
AccessLevel3Setpoint (write configuration to device)
AccessLevel4Setpoint (read settings from device)
AccessLevel5Setpoint (write settings to device)
AccessLevel6Setpoint (read alarm list)
AccessLevel7Setpoint (delete/save alarm list)
AccessLevel8Setpoint (change operating states)
AccessLevel9Setpoint (update firmware)
AccessLevel10Setpoint (run special functions)
AccessLevel11Setpoint (manage users)
UserName - user name
3.10.6.25 Web server
Display name
Data type
Definition
Description
WebserverAutoLogout
EnableSetpoint
Boolean
PropertyType
Execute automatic log off after 15 minutes.
WebserverEnable
Setpoint
Boolean
PropertyType
Activate web server on this module.
WebserverPermitAc-
cessOnlyWithHttpsSet-
point
Boolean
PropertyType
Permit access only with HTTPS
WebserverReload
TimeSetpoint
Enumeration
MultiState
DiscreteType
Update interval: