Siemens SITOP UPS1100 - Diagnostics

Engineering and remote access
3.4 SIMATIC STEP 7 in the TIA Portal
SITOP UPS1600 / BAT1600 / UPS1100
82 Equipment Manual, 07.2021, A5E37775406-11-76
The project data are compiled. The "Load" button is activated as soon as loading is
possible.
3. Click on "Load".
Data is loaded. The "Result of the load operation" dialog window is then opened. In this
dialog, you can check whether the load task was successful and select any further actions.
4. Click on the "Finish" button.
Result
The set parameters have been loaded to the SITOP UPS1600 via the controller.
3.4.9 Diagnostics
The following data can be retrieved using the online and diagnostics function:
Navigation area
Value
General
Module
Short designation
Article number
Hardware
Firmware
Module information
Device name
Module name
Plant designation
Location ID
Manufacturer information
Description of manufacturer
Serial number
Copyright entry
Profile
Profile details
PROFINET interface
Ethernet address / network connection
MAC address
Ethernet address / IP parameter
IP address
Subnet mask
Default router
IP settings
IP setting time
Ports
List of ports
Functions
Assign an IP address
MAC address
IP address
Subnet mask
Router address
Firmware update / UPS1600
Article number
Firmware
Name
Rack
Slot
Firmware file