Siemens SITOP UPS1100 - Actualbatterystate; Actualbufferstate; Actualchargingstate; Actualstate

Engineering and remote access
3.10 OPC UA server
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76
167
3.10.6.2 ActualBatteryState
Display name
Data type
Definition
Description
BatteryChange
Recommended
Boolean
PropertyType
Battery capacity is insufficient to achieve the specified buffer
time.
BatteryCharge
Byte
AnalogItemType
Battery charge level in percent
BatteryChargeVoltage
Float
AnalogItemType
Voltage used to charge battery during the constant charging
phase.
BatteryConnection
Fault
Boolean
PropertyType
The connection to the battery has been interrupted or has a
high impedance.
BatteryCount
Byte
PropertyType
Number of connected batteries. Only SITOP system batteries
are counted.
BatteryVoltage
Float
AnalogItemType
Actual battery voltage
3.10.6.3 ActualBufferState
Display name
Data type
Definition
Description
BufferMode
Enumeration
MultiState
DiscreteType
Indicates buffer mode
BufferReady
Boolean
PropertyType
Sufficient buffer readiness
BufferRemainingTime
UInt32
AnalogItemType
Estimated remaining buffer time. The remaining buffer time
is calculated using the current battery charge level and aver-
age current over 10 minutes.
3.10.6.4 ActualChargingState
Display name
Data type
Definition
Description
ChargeMeasured
Current
Float
AnalogItemType
Measured battery charge current
ChargeSufficient
Boolean
PropertyType
Charge status of the batteries > 85 %
3.10.6.5 ActualState
Display name
Data type
Definition
Description
ChargingOperat-
ingState
Byte
AnalogItemType
Status of the charging unit
DeviceAlarmLed
Object
Sitop_1600_
LedType
Status of LED "Alarm"
DeviceBatteryFaultLed
Object
Sitop_1600_
LedType
Status of LED "BatteryFault"
DeviceBattery
Over85Led
Object
Sitop_1600_
LedType
Status of LED "BatteryOver85"
DeviceCalculated
Capacity
Float
AnalogItemType
Available battery capacity
DeviceCalculated
Health
Byte
AnalogItemType
State-of-Health (SoH) as percentage of the rated capacity