Siemens SITOP UPS1100 - Parameterset; Pn (Profinet); Subdevices

Engineering and remote access
3.10 OPC UA server
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76
175
Display name
Data type
Definition
Description
OPCUAServerPort
Setpoint
Integer
PropertyType
OPC UA server port
OPCUAUnencrypted
AccessEnable
Setpoint
Boolean
PropertyType
Unencrypted access activated
3.10.6.20 ParameterSet
/
All variables of the SITOP UPS1600 are listed together under the "ParameterSet" node.
3.10.6.21 PN (PROFINET)
Display name
Data type
Definition
Description
PNARSetupLocked
Setpoint
Boolean
PropertyType
AR configuration locked
PNDCPReadonly
EnableSetpoint
Boolean
PropertyType
ODCP write protection activated
3.10.6.22 SubDevices
In folder "SupportedTypes", variables and methods are listed, which are available for the
buffer modules.
SITOP BAT1600 and SITOP UPS1100
ActualBufferState
Display name
Data type
Definition
Description
BufferTime
UInt32
AnalogItemType
Desired buffering time before device switches off
BufferingEndVoltage
Float
AnalogItemType
When battery voltage is lower than this voltage, the battery
charge is no longer sufficient. Buffering is stopped.
ActualChargingState
Display name
Data type
Definition
Description
ChargeCurrent
Float
AnalogItemType
Current used to charge battery during the constant charging
phase.
ChargeEndVoltage
Float
AnalogItemType
Battery voltage when charging changes to trickle charging.
Battery is charged 100 %.
ChargingTotalCurrent
Float
AnalogItemType
Battery-specific data: Total charge to the battery during its
service life