EasyManua.ls Logo

Siemens SITOP UPS1100 - Page 176

Siemens SITOP UPS1100
264 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Engineering and remote access
3.10 OPC UA server
SITOP UPS1600 / BAT1600 / UPS1100
176 Equipment Manual, 07.2021, A5E37775406-11-76
ActualState
Display name
Data type
Definition
Description
BatteryCalculated
Health
Byte
AnalogItemType
Calculated battery state (only for SITOP BAT1600)
BatteryOperatingState
Byte
AnalogItemType
Battery status (only for SITOP BAT1600)
ModuleCapacity
Float
AnalogItemType
Battery capacity: Total battery capacity of all energy storage
devices connected to the SITOP UPS1600.
ModuleChange
Recommended
Boolean
PropertyType
Battery capacity is insufficient to achieve the specified buffer
time.
ModuleCompound
Enumeration
MultiState
DiscreteType
Connected device
ModuleConnection
Fault
Boolean
PropertyType
Connection to battery interrupted - check connection and
fuse
ModuleManufactoring
Date
Date
PropertyType
Manufacturing date
ModuleMax
Temperature
Sbyte
AnalogItemType
Maximum specified operating temperature of the battery.
ModuleMin
Temperature
Sbyte
AnalogItemType
Minimum specified operating temperature of the battery.
ModuleStandbyTime
UInt32
AnalogItemType
Battery-specific data: Time for which battery was connected
but no power was consumed.
ModuleStateLed
Object
Sitop_1600_
LedType
ModuleStateLed
ModuleTemperature
Sbyte
AnalogItemType
Battery temperature
Alarm
Display name
Data type
Definition
Description
AlarmBatteryChange
Canceled
Boolean
PropertyType
Battery replacement canceled - battery parameters are not
reset.
AlarmBatteryChange
Finished
Boolean
PropertyType
Battery replacement finished - counters have been reset.
AlarmBatteryChange
Started
Boolean
PropertyType
Battery replacement started by user
AlarmBattery
CommunicationFault
Boolean
PropertyType
Communication with formerly known battery is no longer
possible - check communication
AlarmBatteryDeepDis-
chargedNoCharging
Possible
Boolean
PropertyType
Battery is deep discharged, charging not possible.
AlarmBatteryDefect
Boolean
PropertyType
Battery defective - check fuse and battery voltages.
AlarmBatteryEndOf
LifetimePrewarning
Boolean
PropertyType
Calculated battery service life almost reached. Only restrict-
ed buffer readiness probable.
AlarmBattery
EndOfLifetimeWarning
Boolean
PropertyType
Calculated battery service life reached, battery replacement
recommended.
AlarmBattery
TemperatureHigh
Boolean
PropertyType
Battery temperature too high - battery life will be shortened
AlarmBattery
TemperatureLow
Boolean
PropertyType
Battery temperature too low - reduced output current
AlarmFuseBroken
Boolean
PropertyType
Fuse is defective.
AlarmIncompatible
ModuleDetected
Boolean
PropertyType
Incompatible battery module detected.

Table of Contents

Other manuals for Siemens SITOP UPS1100

Related product manuals