Siemens SITOP UPS1100 - Methodset; Network

Engineering and remote access
3.10 OPC UA server
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76
173
Display name
Data type
Definition
Description
RemainingLockTime
Duration
PropertyType
Remaining time to the inhibit
RenewLock
Method
Method
Renew lock in order to prevent the lock from expiring
1)
Method is not supported.
3.10.6.15 MethodSet
Display name
Data type
Definition
Description
AddUser
Method
Method
Adds a user.
ChangeUserPassword
Method
Method
Changes a user password.
ClearAlarmHistory
Method
Method
Deletes the alarm history.
DeleteUser
Method
Method
Removes a user.
DownloadDevice
Configuration
Method
Method
Downloads the device configuration.
RegenerateCertificate
Method
Method
Initiate the generation of a new safety certificate.
RemoteReset
Method
Method
Executes a remote reset.
RemoteReset2
Method
Method
Executes a remote reset.
ResetSystem
Method
Method
Resets the system to the initial state.
ResetToFactory
Settings
Method
Method
Reset to factory settings.
SendRSignal
Method
Method
Initiate that a reset signal is sent
SendSSignal
Method
Method
Initiate that a shutdown signal is sent
SetNetworkParameter
Method
Method
Sets the network parameters.
ShowAlarmHistory
Method
Method
Shows the alarm history.
ShowPending
AlarmList
Method
Method
Shows the list of active alarms.
UpdateFirmware
Method
Method
Updates the firmware.
UploadAlarmHistory
Method
Method
Uploads the alarm history.
UploadCertificate
Method
Method
Uploads a certificate.
UploadDevice
Configuration
Method
Method
Uploads the device configuration.
UploadLicence
Information
Method
Method
Uploads license information.
UploadPendingAlarm
List
Method
Method
Uploads the list of active alarms.
3.10.6.16 Network
Display name
Data type
Definition
Description
NetworkDHCPEnable
Boolean
PropertyType
Activation of DHCP
NetworkGateway
String[16]
PropertyType
Router address
NetworkIP
String[16]
PropertyType
IP address
NetworkSubnetmask
String[16]
PropertyType
Subnet mask