Safety and security
1.3 Safety instructions for hazardous zones
SITOP UPS1600 / BAT1600 / UPS1100
16 Equipment Manual, 07.2021, A5E37775406-11-76
1.3 Safety instructions for hazardous zones
Only UPS1600 and UPS1100 1.2 Ah, 3.2 Ah, 7 Ah, 12 Ah devices may be used in explosive
environments (hazardous zones).
The devices comply with ATEX directive 2014/34/EU; EN 60079-0; EN 60079-15.
Suitable for Ex applications in CLASS I, DIVISION 2, GROUPS A, B, C and D - or in non-
hazardous zones only.
1.3.1 UPS1600
ACTUATE SWITCHES IN NON-HAZARDOUS AREAS ONLY!
EXPLOSION HAZARD – DO NOT CONNECT OR DISCONNECT EQUIPMENT UNLESS POWER HAS
BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE NON-HAZARDOUS
EXPLOSION HAZARD – SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS
To Next Page
Loading...
