Mounting/removing
5.2 SITOP BAT1600
SITOP UPS1600 / BAT1600 / UPS1100
192 Equipment Manual, 07.2021, A5E37775406-11-76
4 x M5 screws should be used for wall mounting. The clearances for the holes are shown in
the following diagrams.
Figure 5-5 Installation example 6EP4132-0JA00-0AY0 (2.5 Ah LiFePO4)
Figure 5-6 Installation example 6EP4134-0JA00-0AY0 (7.5 Ah LiFePO4)
The fuses should be inserted in the
fuse holder only when commissioning the device
To Next Page
Loading...
