Engineering and remote access
3.5 SIMATIC STEP 7
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76
91
Inserting SITOP UPS1600 from the hardware catalog
1. Select the subnet.
2. Open the "Catalog" window using the "View > Catalog" menu command.
3. In the hardware catalog, navigate to the SITOP UPS1600 under "PROFINET IO \ I/O \
UPS1600".
4. Click the desired SITOP UPS1600; keep the left mouse button pressed and drag the
SITOP UPS1600 to the subnet.
5. Double-click on "SITOP UPS1600".
6. In the open dialog Device name, enter the device number and IP address in the Ethernet.
7. Save the hardware configuration.
You have now inserted the SITOP UPS1600 into the project. The rectangle displayed in the
editor symbolizes the SITOP UPS1600.
To Next Page
Loading...
