Siemens SITRANS FC330 - Page 121

Numeric parameter read only view
Numeric parameters in read only view are displayed as shown below.
4
1
3
5
2
① Escape
② The set value
③ Parameter name
④ Parameter item number
⑤ Help text describing the parameter function.
Figure 7-7 Numeric parameter read only view
The read only view is shown if you do not have access to edit parameters. The view shows the
set value. Press to escape the view.
Parameter list edit view
Lists of parameters in edit view are displayed as shown below.
2
4
1
3
① Parameter list
② Parameter name
③ Parameter item number
④ Help text describing the parameter function. The help text appears if no key is pressed for three
seconds.
Figure 7-8 List Selection edit view
Select the value by using and keys, and press to confirm changes. Press to escape
the view without changing the value.
Operating
7.1 Local operation (HMI)
SITRANS FC330
Operating Instructions, 01/2019, A5E44030648-AB 121