Siemens SITRANS FC330 - Page 241

Level 3 Level 4 Level 5
No. Name No. Name No. Name
2.2.5 Density 2.2.5.1 Units
2.2.5.2 Custom units
2.2.5.3 Custom conversion factor
2.2.5.4 Decimal places
2.2.5.5 Alarm and warning limits 2.2.5.5.1 Upper alarm limit
2.2.5.5.2 Upper warning limit
2.2.5.5.3 Lower warning limit
2.2.5.5.4 Lower alarm limit
2.2.5.5.5 Hysteresis
2.2.5.6 Density adjustment 2.2.5.6.1 Adjustment factor
2.2.5.6.3 Adjustment offset
2.2.5.7 Empty tube detection
2.2.6 Medium temperature 2.2.6.1 Units
2.2.6.2 Decimal places
2.2.6.3 Alarm and warning limits 2.2.6.3.1 Upper alarm limit
2.2.6.3.2 Upper warning limit
2.2.6.3.3 Lower warning limit
2.2.6.3.4 Lower alarm limit
2.2.6.3.5 Hysteresis
2.2.7 Sensor frame tempera‐
ture
2.2.7.1 Units
2.2.7.2 Decimal places
2.2.7.3 Alarm and warning limits 2.2.7.3.1 Upper alarm limit
2.2.7.3.2 Upper warning limit
2.2.7.3.3 Lower warning limit
2.2.7.3.4 Lower alarm limit
2.2.7.3.5 Hysteresis
HMI menu structure
C.3 Menu item 2.2: Process values
SITRANS FC330
Operating Instructions, 01/2019, A5E44030648-AB 241