SimCom SIM7600 Series User Manual

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
197
OK
ERROR
Read Command Responses
AT+CGDCONT? +CGDCONT: [<cid>, <PDP_type>, <APN>,<PDP_addr>,
<d_comp>, <h_comp>,<ipv4_ctrl>,<emergency_flag>[<CR><LF>
+CGDCONT: <cid>, <PDP_type>, <APN>, <PDP_addr>,
<d_comp>, <h_comp>,< ipv4_ctrl>,<emergency_flag>[...]]]
OK
ERROR
Write Command
Responses
AT+CGDCONT=<cid>[,<P
DP_type>[,<APN>[,<PDP_a
ddr>[,<d_comp>[,<h_comp>
][,<ipv4_ctrl>[,<emergency_
flag>]]]]]]
OK
ERROR
Execution Command Responses
AT+CGDCONT
OK
ERROR
Defined values
<cid>
(PDP Context Identifier) a numeric parameter which specifies a particular PDP context definition.
The parameter is local to the TE-MT interface and is used in other PDP context-related commands.
The range of permitted values (minimum value = 1) is returned by the test form of the command.
1…24,100…179
<PDP_type>
(Packet Data Protocol type) a string parameter which specifies the type of packet data protocol.
IP Internet Protocol
PPP Point to Point Protocol
IPV6 Internet Protocol Version 6
IPV4V6 Dual PDN Stack
<APN>
(Access Point Name) a string parameter which is a logical name that is used to select the GGSN or
the external packet data network.
<PDP_addr>
A string parameter that identifies the MT in the address space applicable to the PDP.
R
ead command will continue to return the null string even if an address has been allocated during
the PDP startup procedure. The allocated address may be read using command AT+CGPADDR.
<d_comp>
SIMCOM CONFIDENTIAL FILE

SimCom SIM7600 Series Specifications

General

Brand	SimCom
Model	SIM7600 Series
Category	Control Unit
Language	English