SimCom SIM7600 Series User Manual

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
287
from 3000ms to 120000ms.
<cipopen_timeout>
Timeout value for AT+CIPOPEN, default value is 120000 milliseconds. The range of this value is
from 3000ms to 120000ms.
<cipsend_timeout>
Timeout value for AT+CIPSEND, default value is 120000 milliseconds. The range of this value is
from 3000ms to 120000ms.
Examples
AT+CIPTIMEOUT?
+CIPTIMEOUT: 30000,20000,40000
OK
AT+CIPTIMEOUT=30000,20000,40000
OK
15.2.4 AT+CIPHEAD Add an IP head when receiving data
Description
This command is used to add an IP head when receiving data.
SIM PIN References
YES Vendor
Syntax
Test Command Responses
AT+CIPHEAD=? +CIPHEAD: (list of supported<mode>s)
OK
ERROR
Read Command Responses
AT+CIPHEAD? +CIPHEAD: <mode>
OK
ERROR
Write Command
Responses
AT+CIPHEAD=<mode> OK
ERROR
Execution Command Responses
AT+CIPHEAD Set default value:
OK
SIMCOM CONFIDENTIAL FILE

SimCom SIM7600 Series Specifications

General

Brand	SimCom
Model	SIM7600 Series
Category	Control Unit
Language	English