SimCom SIM7600 Series User Manual

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
403
Examples
AT+CCMXSTOP
+CCMXSTOP:
OK
19 Appendixes
19.1 Verbose code and numeric code
Verbose result code Numeric (V0 set) Description
OK 0 Command executed, no errors, Wake up after reset
CONNECT
1
Link established
RING 2 Ring detected
NO CARRIER 3 Link not established or disconnected
ERROR 4 Invalid command or command line too long
NO DIALTONE 6 No dial tone, dialing impossible, wrong mode
BUSY 7 Remote station busy
NO ANSWER 8 Connection completion timeout
19.2 Response string of AT+CEER
Number Response string
CS internal cause
0 Phone is offline
21
No service available
25 Network release, no reason given
27 Received incoming call
29
Client ended call
34 UIM not present
35
Access attempt already in progress
36 Access failure, unknown source
38 Concur service not supported by network
29
No response received from network
45 GPS call ended for user call
46
SMS call ended for user call
47 Data call ended for emergency call
48 Rejected during redirect or handoff
100
Lower-layer ended call
SIMCOM CONFIDENTIAL FILE

SimCom SIM7600 Series Specifications

General

Brand	SimCom
Model	SIM7600 Series
Category	Control Unit
Language	English