Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
AT+CSMP=17,23,64,244
7.7 AT+CSDH Show text mode parameters
Description
This command is used to control whether detailed header information is shown in text mode result
codes.
Note: This command not support in CDMA/EVDO mode
SIM PIN References
YES 3GPP TS 27.005
Syntax
Test Command Responses
AT+CSDH=?
+CSDH: (list of supported <show>s)
OK
ERROR
Read Command Responses
AT+CSDH?
+CSDH: <show>
OK
AT+CSDH=<show> OK
ERROR
Execution Command Responses
AT+CSDH Set default value (<show>=0):
OK
ERROR
Defined values
<show>
0 – do not show header values defined in commands AT+CSCA and AT+CSMP (<sca>,
<tosca>, <fo>, <vp>, <pid> and <dcs>) nor <length>, <toda> or <tooa> in +CMT,
AT+CMGL, AT+CMGR result codes for SMS-DELIVERs and SMS-SUBMITs in text
mode; for SMS-COMMANDs in AT+CMGR result code, do not show <pid>, <mn>,
<da>, <toda>, <length> or <data>
1 – show the values in result codes
Examples
To Next Page
Loading...
Need help?
General
