SimCom SIM7600 Series User Manual

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
30
Syntax
Execution Command Responses
+++
OK
Examples
+++
OK
3.10 ATO Switch from command mode to data mode
Description
ATO is the corresponding command to the +++ escape sequence. When there is a PS data call
connected and the TA is in Command Mode,
ATO
causes the TA to resume the data and takes back
to Data Mode.
SIM PIN References
YES V.25ter
Syntax
Execution Command Responses
ATO
TA/DCE switches to Data Mode from Command Mode:
CONNECT [<baud rate>]
If connection is not successfully resumed:
NO CARRIER
ERROR
Examples
ATO
CONNECT 115200
3.11 ATI Display product identification information
Description
This command is used to request the product information, which consists of manufacturer
identification,
model identification, revision identification, International Mobile station Equipment
Identity (IMEI) and overall capabilities of the product.
SIM PIN References
SIMCOM CONFIDENTIAL FILE

SimCom SIM7600 Series Specifications

General

Brand	SimCom
Model	SIM7600 Series
Category	Control Unit
Language	English