SimCom SIM7600 Series User Manual

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
296
<err>
The result of operation, 0 is success, other value is failure.
<error message>
The list of all error message:
Invalid parameter
Operation not supported
No data
Examples
AT+SERVERSTART?
+SERVERSTART: 0, 1000
+SERVERSTART: 2, 2000
OK
15.2.12 AT+SERVERSTOP Stop TCP server
Description
This command
stops TCP server. Before stopping a TCP server, all sockets with <server_index>
equals to the closing TCP server index must be closed first.
SIM PIN References
YES Vendor
Syntax
Test Command
Responses
AT+ SERVERSTOP=? OK
ERROR
Execution Command Responses
AT+SERVERSTOP=<server
_index>
+SERVERSTOP: <server_index>,<err>
OK
OK
+SERVERSTOP: <server_index>,<err>
+SERVERSTOP: <server_index>,<err>
ERROR
ERROR
Defined values
SIMCOM CONFIDENTIAL FILE

SimCom SIM7600 Series Specifications

General

Brand	SimCom
Model	SIM7600 Series
Category	Control Unit
Language	English