SimCom SIM7600 Series User Manual

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
289
a numeric parameter which indicates whether show the prompt of where the data received or not
before received data.
0 – do not show the prompt
1 – show the prompt,the format is as follows:
“RECV FROM:<IP ADDRESS>:<PORT>”
Examples
AT+CIPSRIP=?
+CIPSRIP: (0-1)
OK
AT+CIPSRIP=1
OK
15.2.6 AT+CIPMODE Select TCP/IP application mode
Description
This command is used to select transparent mode (data mode) or non-transparent mode (command
mode ).The default mode is non-transparent mode.
SIM PIN References
NO
Vendor
Syntax
Test Command Responses
AT+CIPMODE=? +CIPMODE: (list of supported <mode>s)
OK
Read Command Responses
AT+CIPMODE?
+CIPMODE: <mode>
OK
Write Command Responses
AT+CIPMODE=<mode>
OK
ERROR
Execution Command Responses
AT+CIPMODE
Set default value （ <mode>=0 ） :
OK
Defined values
<mode>
0 – Non transparent mode
SIMCOM CONFIDENTIAL FILE

SimCom SIM7600 Series Specifications

General

Brand	SimCom
Model	SIM7600 Series
Category	Control Unit
Language	English