SimCom SIM7600 Series User Manual

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
92
<alphaX>
String type, operator in long alphanumeric format (see AT +COPS).
Examples
AT+COPN
+COPN: "46000","China Mobile Com"
+COPN: "46001"," China Unicom"
……
OK
5.11 AT+CNMP Preferred mode selection
Description
This command is used to select or set the state of the mode preference.
SIM PIN References
NO Vendor
Syntax
Test Command Responses
AT+CNMP=?
+CNMP: (list of supported <mode>s)
OK
Read Command
Responses
AT+ CN MP?
+CNMP: <mode>
OK
Write Command
Responses
AT+CNMP=<mode> OK
If <mode> not supported by module, this command will return
ERROR.
ERROR
Defined values
<mode>
2 – Automatic
13 – GSM Only
14 – WCDMA Only
38 – LTE Only
59 – TDS-CDMA Only(must use after AT+NETMODE, please refer to AT+NETMODE
command description)
SIMCOM CONFIDENTIAL FILE

SimCom SIM7600 Series Specifications

General

Brand	SimCom
Model	SIM7600 Series
Category	Control Unit
Language	English