SimCom SIM7600 Series User Manual

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
238
23 – get input
24 – select item
25 – set up menu
81 – session end (pdu mode only)
0 – none command
Examples
AT+STIN?
+STIN: 24
OK
11.2 AT+STGI Get SAT information
Description
Regularly this command is used upon receipt of an URC "+STIN" to request the parameters of the
Proactive Command. Then the TA is expected to acknowledge the AT +STGI
response with
AT+STGR to confirm that the Proactive Command has been executed. AT +STGR will also provide
any user information, e.g. a selected menu item. The Proactive Command type value specifies to
which "+STIN" the command is related.
NOTE: Please check the format refered to AT+STKFMT
SIM PIN References
YES Vendor
Syntax
Test Command Responses
AT+STGI=? OK
Write Command Responses
AT+STGI= < cmd_id > PDU format
+STGI: < cmd_id >,< tag >,< pdu_len >,< pdu_value >
OK
AT+STGI= < cmd_id > NOT PDU format, listed below:
If <cmd_id>=10:
OK
If <cmd_id>=21:
+STGI:21,<prio>,<clear_mode>,<text_len>,<text>
OK
If <cmd_id>=22:
+STGI: 22,< rsp_format>,< help>,<text_len>,<text>
OK
SIMCOM CONFIDENTIAL FILE

SimCom SIM7600 Series Specifications

General

Brand	SimCom
Model	SIM7600 Series
Category	Control Unit
Language	English