SimCom SIM7600 Series User Manual

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
97
OK
5.14 AT+CPSI Inquiring UE system information
Description
This command is used to return the UE system information.
SIM PIN References
NO Vendor
Syntax
Test Command Responses
AT+CPSI=?
+CPSI: (scope of <time>)
OK
Read Command Responses
If camping on a cdma/evdo cell:
+CPSI: CDMA,<Operation Mode>[,<MCC>-
<MNC>,<CDMA ch
num>,<CDMA pilot PN>,<CDMA RX Chain 0 AGC>,<CDMA
RX Chain 1 AG
C>,<CDMA Chain 0 LNA>,<CDMA Chain 1
LNA>,<CDMA TX AGC>,<SID>,<NID>,<CDMA
EC/IO>,<BID>]
+CPSI: EVDO,<Operation Mode>[,<MCC>-
<MNC>,<EVDO ch
num>,<EVDO RX Chain 0 AGC>,<EVDO RX Chain 1 AGC>,<
EVDO TX AGC>,<EVDO Serving PN>,<EVDO Rel0
SCI>,<EVDO RelA SCI>,<EVDO EC/IO>]
OK
AT+CPSI?
If camping on a gsm cell:
+CPSI:<System Mode>,<Operation Mode>,<MCC>-<MNC>,<L
AC>,<Cell ID>,<Absolute RF Ch Num>,<RxLev>,
<Track LO Adjust>,<C1-C2>
OK
If camping on a wcdma cell:
+CPSI: <System Mode>,<Operation Mode>,<MCC>-<MNC>,<
LAC>,<Cell ID>,<Frequency Band>,<PSC>,<Freq>,<SSC>,<EC
/IO>,<RSCP>,<Qual>,<RxLev>,<TXPWR>
OK
If camping on a tds-cdma cell:
+CPSI: <System Mode>,<Operation Mode>,<MCC>-<MNC>,<
LAC>,<Cell ID>,<Frequency Band>,<Uarfcn>,<Cpid>
OK
SIMCOM CONFIDENTIAL FILE

SimCom SIM7600 Series Specifications

General

Brand	SimCom
Model	SIM7600 Series
Category	Control Unit
Language	English