SimCom SIM7600 Series User Manual

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
38
The command determines how the state of DSR pin works.
SIM PIN References
YES V.25ter
Syntax
Execution Command Responses
AT&S<value>
OK
ERROR
Defined values
<value>
0 DSR line shall always be on.
1 DSR line shall be on only when DTE and DCE are connected.
Examples
AT&S0
OK
3.20 ATV Set result code format mode
Description
This parameter setting determines the contents of the header and trailer transmitted with result
codes and information responses.
NOTE: In case of using This command without parameter <value> will be set to 0.
SIM PIN References
No
V.25ter
Syntax
Write Command Responses
ATV[<value>] If <value> =0
0
If <value> =1
OK
Defined values
<value>
0 Information response: <text><CR><LF>
SIMCOM CONFIDENTIAL FILE

SimCom SIM7600 Series Specifications

General

Brand	SimCom
Model	SIM7600 Series
Category	Control Unit
Language	English