SimCom SIM7600 Series User Manual

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
247
+IPREX: (0,300,600,1200,2400,4800,9600,19200,38400,57600,115200,230400,460800,921600,
3000000,3200000,3686400)
OK
AT+IPREX=115200
OK
AT+IPREX=0
OK
12.2 AT+CFGRI Indicate RI when using URC
Description
This command is used to configure whether pulling down <URC time>milliseconds the RI pin of
UART when URC reported. If <status> is 1, host may be wake up by RI pin, add setting <URC
time
>,
<SMS time
>
pulling down
time
of RI pin.
SIM PIN References
NO Vendor
Syntax
Test Command Responses
AT+CFGRI=? +CFGRI: (range of supported <status>s), (range of supported
<URC time>s), (range of supported <SMS time>s)
OK
Read Command Responses
AT+CFGRI?
+CFGRI: <status>,<URC time>,<SMS time>
OK
Write Command Responses
AT+CFGRI=<status>,<URC
time>,<SMS time>
OK
ERROR
Execution Command Responses
AT+CFGRI Set <status> = 0
Set <URC time> = 60
Set <SMS time> = 120
OK
Defined values
<status>
0 off
1 on
<URC time>
a numeric parameter which is number of milliseconds to assert RI delay to reset RI. The range is
SIMCOM CONFIDENTIAL FILE

SimCom SIM7600 Series Specifications

General

Brand	SimCom
Model	SIM7600 Series
Category	Control Unit
Language	English