SimCom SIM7600 Series User Manual

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
360
Test Command
Responses
AT+CCHSET=? +CCHSET: (0,1),(0,1)
OK
Read Command
Responses
AT+CCHSET? +CCHSET: <report_send_result>,<recv_mode>
OK
Write Command Responses
AT+CCHSET=<report_send
_result>[,<recv_mode>]
OK
ERROR
Defined values
<report_send_result>
Whether to report result of CCHSEND:
0 – No.
1 – Yes .
<recv_mode>
The receiving mode:
0 – Output the data to MCU whenever received data.
1 – Module caches the received data and notify MCU with +CCHEVENT: <session_id>,
RECV EVENT. MCU can use AT+CCHRECV to receive the cached data(manual receiving mode).
Examples
AT+CCHSET=1,1
OK
15.9.8 AT+CCHADDR Get the IPv4 address for common channel service
Description
This command is used to get the IPv4 address after calling AT+CCHSTART.
SIM PIN References
YES Vendor
Syntax
Execute Command Responses
AT+CCHADDR +CCHADDR: < ip_address>
OK
ERROR
SIMCOM CONFIDENTIAL FILE

SimCom SIM7600 Series Specifications

General

Brand	SimCom
Model	SIM7600 Series
Category	Control Unit
Language	English