SimCom SIM7600 Series User Manual

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
101
5.15 AT+CNSMOD Show network system mode
Description
This command is used to return the current network system mode.
SIM PIN References
NO Vendor
Syntax
Test Command Responses
AT+CNSMOD=?
+CNSMOD: (list of supported <n>s)
OK
Read Command Responses
AT+CNSMOD?
+CNSMOD: <n>,<stat>
OK
ERROR
+CME ERROR: <err>
Write Command Responses
AT+CNSMOD=<n> OK
ERROR
+CME ERROR: <err>
Defined values
<n>
0 – disable auto report the network system mode information
1 – auto report the network system mode information, command: +CNSMOD:<stat>
<stat>
0 – no service
1 – GSM
2 – GPRS
3 – EGPRS (EDGE)
4 – WCDMA
5 – HSDPA only(WCDMA)
6 – HSUPA only(WCDMA)
7 – HSPA (HSDPA and HSUPA, WCDMA)
8 – LTE
9 – TDS-CDMA
10 – TDS-HSDPA only
11 – TDS- HSUPA only
SIMCOM CONFIDENTIAL FILE

SimCom SIM7600 Series Specifications

General

Brand	SimCom
Model	SIM7600 Series
Category	Control Unit
Language	English