SimCom SIM7600 Series User Manual

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
277
Defined values
<result_type>
1 – Ping success
2 – Ping time out
3 – Ping result
<num_pkts_sent>
Indicates the number of ping requests that were sent out.
<num_pkts_recvd>
Indicates the number of ping responses that were received.
<num_pkts_lost>
Indicates the number of ping requests for which no response was received.
<resolved_ip_addr>
Indicates the resolved ip address.
<min_rtt>
Indicates the minimum Round Trip Time (RTT).
<max_rtt>
Indicates the maximum RTT.
<avg_rtt>
Indicates the average RTT.
Examples
AT+ CPINGSTOP
OK
15.1.7 AT+CTCPFIN Configure TCP FIN
Description
This command is used to configure whether the module should wait for TCP_FIN in
TCP_FINWAIT2 state.
SIM PIN References
YES Vendor
Syntax
Test Command
Responses
AT+CTCPFIN=?
+CTCPFIN: (list of supported <TCP_FIN_Enable>s)
OK
ERROR
Read Command Responses
SIMCOM CONFIDENTIAL FILE

SimCom SIM7600 Series Specifications

General

Brand	SimCom
Model	SIM7600 Series
Category	Control Unit
Language	English