SimCom SIM7600 Series

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
372
OK
Read Command Responses
AT+CGPSINFO? +CCGPSINFO: <time>
OK
Write Command Responses
AT+CGPSINFO=<time> OK
+CGPSINFO: [<lat>],[<N/S>],[<log>],[<E/W>],[<date>],[
<UTC
time>],[<alt>],[<speed>],[<course>]
OK (if <time>=0)
Execution Command Responses
AT+CGPSINFO
+CGPSINFO: [<lat>],[<N/S>],[<log>],[<E/W>],[<date>],[<UTC
time>],[<alt>],[<speed>],[<course>]
OK
Defined values
<lat>
Latitude of current position. Output format is ddmm.mmmmmm
<N/S>
N/S Indicator, N=north or S=south
<log>
Longitude of current position. Output format is dddmm.mmmmmm
<E/W>
E/W Indicator, E=east or W=west
<date>
Date. Output format is ddmmyy
<UTC time>
UTC Time. Output format is hhmmss.s
<alt>
MSL Altitude. Unit is meters.
<speed>
Speed Over Ground. Unit is knots.
<course>
Course. Degrees.
<time>
The range is 0-255, unit is second, after set <time> will report the GPS information every the
seconds.
Examples
AT+CGPSINFO=?
+CGPSINFO: (0-255)
SIMCOM CONFIDENTIAL FILE