Simplex 4100 Operator's Manual

6-3
Category Attribute Description
Present sensitivity selected Displays the current sensitivity of the device.
Average value Displays the average smoke obscuration value recorded by
the sensor.
Alarm value Displays the smoke obscuration value required to trigger an
alarm.
Current value (per cent of
alarm)
Displays the current smoke obscuration value.
TrueAlarm
Sensors Only
Peak value (per cent of
Alarm)
Displays the maximum smoke obscuration value reported by
the detector as a percentage. Note that this is the maximum
value reported since the last time this counter was cleared.
Display-Only Attributes, Continued
Summary of Display-
Only Attributes,
(continued)
Table 6-2. Display-Only Attributes (continued)
firealarmresources.com

Simplex 4100 Specifications

General

Type	Fire Alarm Control Panel
Manufacturer	Simplex
Model	4100
Network Capability	Yes
Addressable	Yes
Power Supply	120/240 VAC, 50/60 Hz
Display	LCD
Annunciator Support	Yes
Battery Backup	Yes
Releasing Capability	Yes
Max Devices	Depends on configuration
Max Notification Appliance Circuits (NAC)	Varies with configuration
Max Releasing Circuits	Varies with configuration
Max Remote Annunciators	Varies with configuration
Communication Ports	Multiple
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity Range	Up to 93% RH, non-condensing
NAC Outputs	4 (expandable)
Networking	Yes