Simplex 4100 Operator's Manual

11-2
The 4100 includes two printer options: Select Report Printer and Terminate Current Report.
Follow these steps to set these options.
1. Press the MENU key.
2. Press the NEXT and PREV keys until the prompt reads, “Printer Options?”
3. Press ENTER.
4. Press the NEXT and PREV keys to select either
• Select Report Printer. When you select this option, the
• Terminate Current Report. Select this option to terminate the the report currently
being printed on the 4100’s report printer.
Setting Printer Options
Available Options
firealarmresources.com

Simplex 4100 Specifications

General

Type	Fire Alarm Control Panel
Manufacturer	Simplex
Model	4100
Network Capability	Yes
Addressable	Yes
Power Supply	120/240 VAC, 50/60 Hz
Display	LCD
Annunciator Support	Yes
Battery Backup	Yes
Releasing Capability	Yes
Max Devices	Depends on configuration
Max Notification Appliance Circuits (NAC)	Varies with configuration
Max Releasing Circuits	Varies with configuration
Max Remote Annunciators	Varies with configuration
Communication Ports	Multiple
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity Range	Up to 93% RH, non-condensing
NAC Outputs	4 (expandable)
Networking	Yes