Simplex 4100 Operator's Manual

8-2
The Historical Alarm and Fault Logs can be viewed either from the 4100 Operator Panel.
1. Press the <MENU> key.
2. Using the <NEXT> and <PREVIOUS> keys, scroll through the Main Menu items until
the "Display Historical Alarm Log?" or "Display Historical Fault Log?" menu prompt
appears on the alphanumeric display.
3. Press the <ENTER> key on the ENTRY keypad.
4. Using the <NEXT> and <PREVIOUS> keys on the DISPLAY/ACTION keypad scroll
through the list of logged events, until the desired event is shown on the display.
NOTE: Pressing the <PREVIOUS> key first, causes the most recent event to be
displayed.
5. When finished, press the <CLR> key to escape from the main menu.
1. Press the <MENU> key.
2. Using the <NEXT> and <PREVIOUS> keys, scroll through the Main Menu items until
the "Display Historical Alarm Log?" or "Display Historical Fault Log?" menu prompt
appears on the alphanumeric display.
3. Press the <ENTER> key.
4. Press the FUNCTION key
5. Press the F3 key to clear the log.
Viewing and Clearing the Historical Alarm and Fault Logs
Viewing Logs
Clearing the Logs
firealarmresources.com

Simplex 4100 Specifications

General

Type	Fire Alarm Control Panel
Manufacturer	Simplex
Model	4100
Network Capability	Yes
Addressable	Yes
Power Supply	120/240 VAC, 50/60 Hz
Display	LCD
Annunciator Support	Yes
Battery Backup	Yes
Releasing Capability	Yes
Max Devices	Depends on configuration
Max Notification Appliance Circuits (NAC)	Varies with configuration
Max Releasing Circuits	Varies with configuration
Max Remote Annunciators	Varies with configuration
Communication Ports	Multiple
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity Range	Up to 93% RH, non-condensing
NAC Outputs	4 (expandable)
Networking	Yes