6-5
Table 6-4. Modifiable Attributes (continued)
Attribute Description
TrueAlarm Peak Analog
Values
Allows you to clear the peak value of a TrueAlarm sensor.
Sensitivity (Alarm
Threshold)
Allows you to set the target value at which the device goes
into alarm. Target value can be either of the following.
• Sensitivity of smoke detectors
• Threshold of analog ZAMs, heat detectors and VESDA
devices.
Modifiable Point Attributes, Continued
Summary of
Modifiable
Attributes,
(continued)
To Next Page
Loading...
