Argus Radar - RADAR CONFIGURATION
988-10187-004 3.10
3.7.1 Adjustment of Azimuth Type (PPR Selection)
Pressing the B button of fig. 3.7.1, page 3.9, a list will be open with all the possible
azimuth values.
The list below shows all the standard and some special configurations with the relevant
PPR:
NOTE
If the communication with the transceiver has already been established, if
the Heading Line pulse is being received and if it has been correctly set, it
is possible to read the PPR value measured by he system, on the label
next to the PPR selection (between parenthesis). This is the easier and
faster way to insert the correct PPR setting.
Antenna
To Next Page
Loading...
