Simrad argus - MAC Address (Fig 3.11.1 -C); TXRX Associated by Default (Fig 3.11.1 - D); General Info (Fig 3.11.1 - E)

Argus Radar - RADAR CONFIGURATION
988-10187-004 3.25
3.11.3 MAC Address (Fig 3.11.1 -C)
This is the Ethernet MAC address of the board (not settable). Part of the address is a field
assigned only to Simrad. Less significant bytes are different for any Antares PCB
manufactured.
3.11.4 TXRX Associated by Default (Fig 3.11.1 – D)
By pressing the relevant button, the following list with all the transceivers connected will be
displayed:
This is not the interswitch, this list selects the TXRX to use at the start-up of the system.
For example if the Port Argus Console is normally used with TXRX n 2, the selection
“TXRX2” shall be chosen in the left list, and if a blackout occurs or the system is restarted
or completely powered off and on again, the Console will automatically select the TXRX n
2 at the restart.
WARNING
IF THE SETUP HAS TO BE TRANSFERRED FROM CONSOLE TO CONSOLE VIA
A MEMORY STICK, CHECK THAT THE DEFAULT TRANSCEIVER IS NOT THE
SAME FOR ANY OF THE CONSOLES.
3.11.5 General info (Fig 3.11.1 – E)
This window shows information regarding the screen resolution, PPI pixel size and the
exact software version installed in the system.