Simrad argus - Chapter 4 Debug and Simulation Facilities; General Information

Argus Radar - Installation and service manual
988-10187-004 4.1
CHAPTER 4
DEBUG AND SIMULATION FACILITIES
4.1 General information
Simulation
The first part of this menu is dedicated to simulation facilities:
Figure 4.1.1 Debug and simulation menu
• Trigger, if the transceiver is in failure, it is possible to test most of the
functions of the display just by choosing a PRF to be simulated, in the
first row of the menu.
• Antenna, if not available for some reason, just press "Antenna Sim
”
and
setting the correct antenna speed.
• Speed Log, when speed log is not working, just select this window "Log
Simulation
”
and set the correct speed.
WARNING
THIS IS NOT THE SAME AS MANUAL SPEED.
THIS IS A SIMULATION AND IF YOU
CHOOSE THIS FACILITY, THE SYSTEM WILL ALSO STOP RECEIVING DATA FROM
A CONNECTED EPFS, BUT WILL CALCULATE THE SHIP’S
POSITION USING THE
SPEED YOU INSERTED.