2
Original EC Declaration of Incorporation in accordance with Directive 2006/42/EC,
Appendix II Part 1 B
The manufacturer hereby declares at its sole responsibility that the partly completed machinery conforms to the essential health and safety
requirements of the Machinery Directive 2006/42/EC, Annex I, marked in the Annex to the EC Declaration of Incorporation as applicable and
fulfilled at the time of placing on the market.
The special technical documents were prepared following Annex VII part B. Upon justifiable request, these special technical documents can
be forwarded electronically to the respective national authorities. The authorized company for the compilation of the technical
documentation is the manufacturer.
Electrically operated pump for the feeding of lubricants in interval operation inside a centralized lubrication system
6440-xxxxxxxx /644-xxxxx-x / 94xxxxxx, 094xxxxxxx
Furthermore, the following directives and standards were applied in the respective applicable areas:
2006/42/EC: Machinery Directive
2011/65/EU: RoHS II
2014/30/EU: Electromagnetic Compatibility
EN 61000-6-2:2005/AC:2005
EN 61000-6-4:2007/A1:2011
EN 809:1998+A1:2009/AC:2010
EN 60947-5-1:2004/A1:2009
EN 60947-5-2:2007/A1:2012
The partly completed machinery must not be put into service until it has been established that the machinery into which it is to be
incorporated is in compliance with the provisions of the Machinery Directive 2006/42/EC and all other applicable Directives.
Walldorf, 21.05.2021
Manager, PD
Germany South
Manufacturer: SKF Lubrication Systems Germany GmbH, Heinrich-Hertz-Str. 2-8, 69190 Walldorf, Germany
Original UK Declaration of incorporation according to the Supply of Machinery (Safety)
Regulations 2008 No. 1597 Annex II
The manufacturer hereby declares under sole responsibility that the partly completed machinery complies with the essential health and
safety requirements of UK legislation Supply of Machinery (Safety) Regulations 2008 No. 1597 Annex I, marked in the Annex to the EC
Declaration of Incorporation as applicable and fulfilled at the time of placing on the market.
The special technical documents were prepared following Annex VII part B. Upon justifiable request, these special technical documents can
be forwarded electronically to the respective national authorities. The authorized company for the compilation of the technical
documentation is SKF (U.K.) Limited, 2 Canada Close, Banbury, Oxfordshire, OX16 2RT, GBR.
Electrically operated pump for the feeding of lubricants in interval operation inside a centralized lubrication system
6440-xxxxxxxx /644-xxxxx-x / 94xxxxxx, 094xxxxxxx
Furthermore, the following regulations and standards were applied in the respective applicable areas:
Supply of Machinery (Safety) Regulations 2008 No. 1597
Electromagnetic Compatibility Ordinance 2016 No. 1091
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 No. 3032
EN 61000-6-2:2005/AC:2005
EN 61000-6-4:2007/A1:2011
EN 809:1998+A1:2009/AC:2010
EN 60947-5-1:2004/A1:2009
EN 60947-5-2:2007/A1:2012
The partly completed machinery must not be put into service until it has been established that the machinery into which it is to be
incorporated is in compliance with the provisions of UK legislation Supply of Machinery (Safety) Regulations 2008 No. 1597 and all other
applicable Directives.
Walldorf, 21.05.2021
Manager, PD
Germany South
Manufacturer: SKF Lubrication Systems Germany GmbH, Heinrich-Hertz-Str. 2-8, 69190 Walldorf, Germany
To Next Page
Loading...
